THERMOMASTER acrylic finishing coat
Base coat of the THERMOMASTER or other EPS based ETICS systems protecting the system against weathering and providing a decorative finish.
CE mark
Store protected against atmospheric exposure, especially sun-radiation and other heat sources
Read the technical
Read the instruction
Protect from freezing
UsableAcrylic (A), floated (K) or ribbed (G) render, with a granule size of 1,5 mm or 2 mm
Material: ready to use paste, mixture of synthetic acrilyc resin, marble granules, additives and water. It can be coloured according to the wide range of THERMOMASTER colours.
Fields of application: it is applied to the base coat as a top coat of THERMOMASTER or other EPS based ETICS systems and it contributes to the protection of the system against weathering and provide a decorative finish.
Coverage:
THERMOMASTER AK 1,5 mm: ~2,5 kg/m2
THERMOMASTER AK 2,0 mm: ~3,0 kg/m2
THERMOMASTER AG 2,0 mm: ~2,5 kg/m2
Temperature during application: (+)5°C – (+)25°C (both ambient air and base surface). Humidity of the air is maximum 75%.
Drying time: 24 – 48 hours (depending on weather conditions)
Storage, expiry date: under dry conditions, protected against atmospheric exposure, especially sun-radiation and other heat sources. Storing temperature is between (+)5°C and (+)25°C. In case of the prescribed storage and handling conditions, the expiry date of the product is 12 months after production.
Available: 25 kg/plastic pail
Technical assistance
Should you need some technical information, please do not hesitate to contact us!
Need some technical help